TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1012 of 1440

TM 9-2350-256-20-2

0402 00

22.

Open two dual-pull mechanisms (48) and remove four cables (4 and 35) as follows: grasp 3/16 in. (5 mm) of each end of

cable clamp (52) with pliers. Rotate ends of clamp simultaneously until cable clamp has been untwisted and cables are

released.

Installation

1.

Install two fastener assemblies (3) and two manual control levers (2) on two cables (4).

2.

Install gasket (8) and pull-release mechanism (7) with two lockwashers (10) and two nuts (9).

3.

Install two cables (4) through pull-release mechanism (7).

4.

Install two adapters (11), two swivel connectors (12), and two conduits (13).

5.

Install cover (5) with three screws (6) onto pull-release mechanism (7).

0402 00-6