TM-9-2350-256-20-2
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2
JUNE 2005
TM-9-2350-256-20-2 - Page 1067 of 1440
TM 9-2350-256-20-2
0416 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MECHANICAL TRANSMISSION AND HYDRAULIC PUMP
HYDRAULIC LINES AND FITTINGS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Sealant tape (item 34, WP 0489 00)
WARNING
Do not attempt to loosen or tighten hydraulic fittings or lines when the system is pressurized. Ensure
that the boom is in the stowed position before doing any maintenance on the hydraulic system.
NOTE
Individual hydraulic lines and fittings may be removed and replaced separately as required. Each line
is marked with a part number and code number alternately at 36-inch (in.) (914-millimeter [mm] )
intervals along its length. Foldout FO-1 (at the end of this manual) provides a schematic of hydraulic
lines and fittings.
0416 00-1
Back to Top
