TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1059 of 1440

TM 9-2350-256-20-2

0414 00

7.

Remove 12 fittings (26) as necessary.

8.

Remove three screws (27), three lockwashers (28), and three clips (29) from two hoses (30) and hose (31).

9.

Remove hose (31) by removing loop clamp (32).

10.

Remove two hoses (30) by removing four loop clamps (33) and two pipes (34) from two boot assemblies (35).

Installation

1.

Install two boot assemblies (35), two pipes (34), four loop clamps (33), and two hoses (30).

2.

Install hose (31) with loop clamp (32).

3.

Install hose (31) and two hoses (30) with clip (29), lockwasher (28), and screw (27) each.

4.

Install 12 fittings (26) as necessary.

5.

Install tray (25) with 11 flat washers (24), 11 lockwashers (23), and 11 screws (22).

6.

Install wire rope assembly (21) with two pins (20) and two nuts (19).

0414 00-3