TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1055 of 1440

TM 9-2350-256-20-2

0413 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

WIRE ROPE ROLLER HOUSING AND BEARING MAINTENANCE

REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Materials/Parts

Lockwashers (8) (item 640, WP 0491 00)

Screws (8) (item 800, WP 0491 00)

References

WP 0097 00

Equipment Condition

U-35 winch center right floor plate opened (see WP 0289

00)

Removal

1.

Remove two housing and bearing assemblies (1) and two rollers (2) by removing eight screws (3) and eight lockwashers (4).

Disassembly

1.

Remove four fittings (5) and four sleeve bearings (6).

Assembly

1.

Install four sleeve bearings (6) and four fittings (5).

Installation

1.

Install eight lockwashers (4), eight screws (3), and two rollers (2) into two housing and bearing assemblies (1).

2.

Lubricate housing and bearing assemblies (1) using four fittings (5) (see WP 0097 00).

NOTE

Follow-on maintenance: Close U-35 winch center right floor plate (see WP 0289 00).

END OF WORK PACKAGE

0413 00-1/2 blank