TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

  TM-9-2350-256-20-2 - Page 1045 of 1440

TM 9-2350-256-20-2
0409 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HOIST WINCH HOSE AND CABLE ASSEMBLY REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Grease, GAA (item 13, WP 0489 00)
Equipment Condition
U-35 winch center right floor plate opened (see WP 0289
00)
Cable paid out (refer to TM 9-2350-256-10)
Floor plates door opened (see WP 0287 00 thru 0308 00)
WARNING
Gloves should be worn when working with cable to prevent cuts and abrasions.
Removal
1.
Disconnect hose (1) from elbow (2), and remove two band markers (3) from hose.
2.
Remove hoses (1 and 4) from tee (5).
3.
Remove tee (5) and seal (6).
0409 00-1


Back to Top