TM 9-2350-256-20-2
0408 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
MAIN
WINCH CABLE
REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Grease, GAA (item 13, WP 0489 00)
Lockwashers (16) (item 652, WP 0491 00)
Screws (4) (item 26, WP 0491 00)
Materials/Parts (cont.)
Screws (8) (item 415, WP 0491 00)
Screws (8) (item 807, WP 0491 00)
Equipment Condition
Cable paid out (refer to TM 9-2350-256-10)
WARNING
Gloves should be worn when working with cable to prevent cuts and abrasions.
Removal
1.
Remove two guides (1) by removing four screws (2) and four lockwashers (3) from each.
2.
Remove two retainers (4) by removing four screws (5) and four lockwashers (6) from each. Remove two halfbushings (7).
3.
Remove two vertical rollers (8), and separate guide assemblies (9) by removing two screws (10) and two bearing washers
(11).
0408 00-1