TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 373 of 1440

TM 9-2350-256-20-2

0227 00

Disassembly

1.

Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).

Assembly

1.

Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).

Installation

1.

Install two clamps (37) using two screws (38) and two washers (39).

2.

Connect lead (13) to APU generator (31) using three lockwashers (36) and nut (35).

3.

Connect two leads (10 and 11) to APU generator (31) using two nuts (34).

4.

Connect two connectors (9 and 12) to APU starter relay (33).

5.

Connect lead (8) to APU generator (31) using nut (32).

6.

Connect lead (7) to preheat solenoid (20) using four lockwashers (30) and nut (29).

7.

Connect lead (6) to preheat solenoid (20) using four lockwashers (27) and nut (26).

8.

Connect lead (5) from fuel shutoff solenoid (23) using washer (25) and nut (24).

9.

Connect lead (4) to preheat solenoid (20) using washer (22) and nut (21).

10.

Connect lead (3) to diode assembly (16) using screw (17), lockwasher (18), and nut (19).

0227 00-5