TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 469 of 1440

TM 9-2350-256-20-2

0259 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

TYPICAL FEMALE-TYPE PANEL MOUNTING RECEPTACLE REPAIR

DISASSEMBLY, ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Materials/Parts

Rod (item 28, WP 0489 00)

References

TB SIG 222

WARNING

Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and

burns.

NOTE

In plug and receptacle assemblies, plug all spare grommet holes with rod.

Disassembly

1.

Drive socket contact (1) out through rear of insert (2) with pin extractor.

2.

Unsolder cable leads (3) from solder wells on socket contacts (1).

3.

Slide insert (2) out through rear of shell (4).

Assembly

1.

Strip cable (3) insulation equal to depth of solder wells of socket contacts (1).

2.

Insert cable leads (3) into solder wells of socket contacts (1) and solder (use resin core solder only) (refer to TB SIG 222).

3.

Push insert (2) into shell (4) from rear until seated. Groove (5) in insert must be aligned with guide in shell (4) to ensure

proper fit.

4.

Push socket contacts (1) into insert (2) from rear until seated.

END OF WORK PACKAGE

0259 00-1/2 blank