TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 480 of 1440

TM 9-2350-256-20-2

0264 00

Assembly

1.

Strip cable leads (3) insulation equal to depth of solder wells of pin contacts (6).

2.

Slide nut (1) over cable lead (3).

3.

Slide grommet (4) over cable leads (3).

4.

Insert cable leads (3) into solder wells of pin contacts (6) and solder (use resin core solder only) (refer to TB SIG 222).

5.

Push insert (7) into shell (2) from rear until seated. Groove (8) in insert must be aligned with guide in shell assembly (2) to

ensure proper fit.

6.

Push pin contacts (6) into insert (7) from rear until seated.

7.

Slide coupling nut (5) onto shell assembly (2).

8.

Push grommet (4) down cable leads (3) and over solder wells of pin contacts (5).

9.

Screw nut (1) onto shell assembly (2).