TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 487 of 1440

TM 9-2350-256-20-2

0266 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

TRANSMISSION

OIL FILTER

MAINTENANCE

REMOVAL, SERVICE, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Wrench, torque (item 67, WP 0490 00)

Materials/Parts

Filter elements (4) (item 129, WP 0491 00)

Gaskets (2) (item 2, WP 0491 00)

Materials/Parts (cont.)

Lockwashers (24) (item 640, WP 0491 00)

Screws (24) (item 390, WP 0491 00)

Equipment Condition

Engine transmission access doors opened (see WP 0340

00)

NOTE

Removal and installation procedures are the same for both left- and right-side oil filter heads.

Removal

1.

Remove 12 screws (1) and 12 lockwashers (2).

CAUTION

Prying oil filter head off with screwdriver or other object could cause damage to mating surfaces.

2.

Use two screws (1) as jackscrews to remove oil filter head (3). Screw two screws into threaded holes (4) and raise oil filter

head.

3.

Remove and discard gasket (5).

4.

Remove and discard two oil filter cartridge assemblies (6).

0266 00-1