TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 504 of 1440

TM 9-2350-256-20-2

0273 00

WARNING

Be sure to place wooden block (8) under output reduction drive (2) before removing.

5.

Place wooden block (8) under output reduction drive (2).

6.

Remove 19 self-locking bolts (9) holding output reduction drive (2) to vehicle hull.

CAUTION

Jackscrews (10) must make output reduction drive (2) clear hull to ensure proper lifting sling operation.

7.

Install two jackscrews (10) into two threaded holes in output reduction drive (2). Tighten jackscrews alternately and move

output reduction drive out approximately 2 in. (51 mm).

8.

Install lifting sling (11).

9.

Remove two jackscrews (10).

0273 00-2