TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 531 of 1440

TM 9-2350-256-20-2

0278 00

Installation

1.

Install oil seal (2) in roadwheel support housing (1) using replacer and handle.

WARNING

Sealer coating is toxic and gives off harmful vapors. Use in a well-ventilated area. If adhesive gets in

eyes try to keep eyes open; flush eyes with water for 15 minutes and get immediate medical attention.

WARNING

Roadwheel support housing is heavy, use care when installing housing to avoid injury.

2.

Apply sealer coating to mounting surface of roadwheel support housing (1) and vehicle hull. Install roadwheel support

housing on hull with 11 screws (3) and 11 lockwashers (4). Torque screws to 245–270 lb-ft (332–366 N•m).

NOTE

Follow-on maintenance: Install roadwheel arm assembly (see WP 0276 00).

END OF WORK PACKAGE

0278 00-3/4 blank