TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 622 of 1440

TM 9-2350-256-20-2

0309 00

Removal

1.

Remove support (1) by removing screw (2) and lockwasher (3).

2.

Remove support (4) by removing four screws (5), four lockwashers (6), four nuts (7), three screws (8), and three lockwash-

ers (9).

3.

Remove support (10) by removing two screws (11), two lockwashers (12), and two nuts (13).

4.

Remove support (14) by removing two screws (15), two lockwashers (16), and two flat washers (17).

Installation

1.

Install support (14) with two flat washers (17), two lockwashers (16), and two screws (15).

2.

Install support (10) with two nuts (13), two lockwashers (12), and two screws (11).

3.

Install support (4) with four nuts (7), four lockwashers (6), four screws (5), three lockwashers (9), and three screws (8).

4.

Install support (1) with lockwasher (3) and screw (2).

NOTE

Follow-on maintenance: Install fire extinguisher line loop clamps (see WP 0403 00); Install hydraulic

valve forward intermediate right floor plate (see WP 0308 00); Install stowage basket forward interme-

diate left floor plate (see WP 0306 00); Install hydraulic valve forward right floor plate (see WP 0288

00); Install bilge pump (see WP 0251 00).

END OF WORK PACKAGE

0309 00-2