TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 695 of 1440

TM 9-2350-256-20-2

0329 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

BOOM SUPPORT AND RELATED PARTS MAINTENANCE

REMOVAL, INSTALLATION, ADJUSTMENT

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Wrench, torque (item 67, WP 0490 00)

Materials/Parts

Lockwashers (8) (item 642, WP 0491 00)

Nut (item 683, WP 0491 00)

Pins, cotter (6) (item 525, WP 0491 00)

Pin, cotter (item 529, WP 0491 00)

Pin, straight (item 57, WP 0491 00)

Materials/Parts (cont.)

Pins, straight (3) (item 744, WP 0491 00)

Screws (8) (item 417, WP 0491 00)

Screw, adjusting (item 750, WP 0491 00)

Springs (4) (item 169, WP 0491 00)

Washers, flat (16) (item 162, WP 0491 00)

Washer, flat (item 543, WP 0491 00)

Equipment Condition

Hoisting boom raised (refer to TM 9-2350-256-10)

Removal

1.

Remove support latch (1) and spring (2) by removing cotter pin (3), washer (4), and straight pin (5).

2.

Remove latch adjusting screw (6) and nut (7).

3.

Remove three latches (8) and three springs (9) by removing six cotter pins (10) and three straight pins (11).

4.

Remove boom support (12) by removing 8 screws (13), 8 lockwashers (14), and 16 flat washers (15).

0329 00-1