TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005
TM-9-2350-256-20-2

  TM-9-2350-256-20-2 - Page 771 of 1440

TM 9-2350-256-20-2
0351 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
RIGGER’S SEAT
ASSEMBLY
MAINTENANCE
REMOVAL, DISASSEMBLY, INSPECTION, REPAIR, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Awl, saddler’s sewing (item 2, WP 0490 00)
File, thread restorer (thread chaser) (item 14, WP 0490
00)
Hammer, hand (mallet) (item 18, WP 0490 00)
Materials/Parts
Lockwashers (6) (item 638, WP 0491 00)
Lockwashers (8) (item 640, WP 0491 00)
Nuts (6) (item 756, WP 0491 00)
Nuts (4) (item 769, WP 0491 00)
Pin (item 178, WP 0491 00)
Pin (item 180, WP 0491 00)
Materials/Parts (cont.)
Pin (item 181, WP 0491 00)
Pin (item 182, WP 0491 00)
Pins, cotter (11) (item 520, WP 0491 00)
Screws (6) (item 367, WP 0491 00)
Screws (8) (item 721, WP 0491 00)
Spring (item 166, WP 0491 00)
Spring (item 179, WP 0491 00)
Springs (2) (item 183, WP 0491 00)
Springs (2) (item 189, WP 0491 00)
Washer, flat (item 858, WP 0491 00)
Personnel Required
Mechanics (2)
WARNING
Rigger’s seat assembly is extremely heavy-two persons are required to lift it.
WARNING
Be sure not to lift rigger’s seat assembly by seat adjusting lever or seat may spring up and cause injury.
0351 00-1


Back to Top