TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 764 of 1440

TM 9-2350-256-20-2

0350 00

6.

Remove base assembly (22) by removing four nuts (23), four lockwashers (24), and four screws (25).

WARNING

Ensure that base assembly (22) is raised to full extension and adequately braced prior to spring removal.

Failure to do so will result in base assembly collapsing.

7.

Pry two adjuster springs (26) from axle (27) to relieve tension. Remove two adjuster springs.

8.

Remove two springs (28) and spring retainer (29).

9.

Remove bracket (30) by removing four cotter pins (31) and two axles (27 and 32).

10.

Remove arm (33) and guard (34) by removing four cotter pins (35) and two axles (36 and 37) from carriage assembly (8)

and base (38).

11.

Remove release assembly (39) by removing two cotter pins (40) and axle (41) from carriage assembly (8).

12.

Remove knob (42) from release assembly (39).

0350 00-4