TM-9-2350-256-20-2
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2
JUNE 2005
TM-9-2350-256-20-2 - Page 759 of 1440
TM 9-2350-256-20-2
0349 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
PERSONNEL SEAT ASSEMBLIES MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Lockwashers (4) (item 638, WP 0491 00)
Screws (4) (item 782, WP 0491 00)
NOTE
The following procedures are the same for both personnel seat assemblies.
Removal
1.
Remove personnel seat assembly (1) from cab subfloor plate (2) by lifting.
Disassembly
1.
Pull pedestal assembly (3) from seat (4).
2.
Remove seat (4) from seat cushion (5) by removing two screws (6) and two lockwashers (7).
Assembly
1.
Install seat (4) on seat cushion (5) with two lockwashers (7) and two screws (6).
2.
Place pedestal assembly (3) onto seat (4).
Installation
1.
Insert personnel seat assembly (1) into cab subfloor plate (2).
END OF WORK PACKAGE
0349 00-1/2 blank
Back to Top
