TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 858 of 1440

TM 9-2350-256-20-2

0363 00

Repair or Replacement

1.

Straighten any rods which are bowed.

2.

Replace any badly worn clevis rod ends or pins.

3.

Repair damaged threads with thread restoring file where possible, or replace defective threaded parts

4.

Replace defective rubber parts.

Assembly

1.

Install lubrication fitting (103) to bearing units (27 and 28).

Installation

1.

Install bell crank assembly (96) with flat washer (102), retaining ring (101), and lubrication fitting (100).

2.

Install bracket assembly (95) and bell crank assembly (96) with two screws (99), two washers (98), and two nuts (97).

3.

Install nut (94) and bearing (93) to each end of rod (90).

4.

Install self-locking nut (92) and screw (91) to each end of rod (90).

5.

Install nut (89) and bearing (88) to each end of rod (87).

6.

Install rod (87) with screw (85) and self-locking nut (86).

0363 00-8