TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 865 of 1440

TM 9-2350-256-20-2

0364 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

ACCELERATOR CONTROLS AND LINKAGES ALIGNMENT

ALIGNMENT, ADJUSTMENT

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Punches, drive (2) (locating pins) (item 43, WP 0490 00)

Materials/Parts

Adhesive, rubber-base (item 3, WP 0489 00)

Equipment Condition

Powerplant removed for alignment only (see WP 0098

00)

Engine throttle lever linkage disconnected (see WP 0363

00)

Alignment

1.

Loosen nuts (1 and 2).

2.

Insert 1/8-in.- (3.2 mm-) diameter locating pin (3) in bracket (4) and accelerator pedal (5) (point 1).

3.

Adjust linkage leaving nuts (1 and 2) loose until 1/8-in.- (3.2 mm-) diameter locating pin (6) can be inserted in bell crank

(7) (point 2).

4.

Tighten nuts (1 and 2). Remove locating pins (3 and 6) and connect linkage to engine throttle lever (see WP 0363 00).

0364 00-1