TM-9-2350-256-34
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 2005
TM-9-2350-256-34 - Page 133 of 584
TM 9-2350-256-34
0023 00
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
POWERPLANT
MAINTENANCE
DESCRIPTION, REMOVAL, DISASSEMBLY, CLEANING,
INSPECTION, REPAIR, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Engine and transmission cart (optional) (Table 1, WP
0088 00)
Sling (item 30, WP 0086 00)
Tool kit, general mechanic’s (item 34, WP 0086 00)
Materials/Parts
Brush, scrub (item 4, WP 0085 00)
Cleaning compound (item 5, WP 0085 00)
Detergent (item 6, WP 0085 00)
Gasket (item 31, WP 0087 00)
Lockwashers (26) (item 163, WP 0087 00)
Nuts (24) (item 199, WP 0087 00)
Nuts, self-locking (2) (item 111, WP 0087 00)
Materials/Parts (cont.)
Screws (2) (item 69, WP 0087 00)
Screws (2) (item 224, WP 0087 00)
Washers (2) (item 229, WP 0087 00)
Personnel Required
Mechanics (3)
References
DA Form 2408-10
TM 9-2350-256-20
TM 9-2520-215-34
TM 9-2815-220-34
DESCRIPTION
Refer to TM 9-2815-220-34 for the description and operation of the Continental model AVDS-1790-2DR engine. Refer to TM
9-2520-215-34 for the description and operation of the Allison-GM model XT-1410-4 cross-drive transmission.
Removal
1.
Remove powerplant in accordance with TM 9-2350-256-20.
Disassembly
NOTE
The following procedure contains instructions for separating the main engine from the transmission.
NOTE
If just the transmission is to be repaired or replaced, it is not necessary to remove the accessory items
from the engine.
1.
Remove all accessory items necessary to work on the engine and transmission (refer to TM 9-2350-256-20).
0023 00-1
Back to Top
