TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 311 of 584

TM 9-2350-256-34

0060 00

INTERMEDIATE MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

MAIN WINCH LEVEL WINDER ASSEMBLY MAINTENANCE

REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, ASSEMBLY, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 34, WP 0086 00)

Materials/Parts

Cleaning compound (item 5, WP 0085 00)

Oil (item 8, WP 0085 00)

Paint thinner (item 18, WP 0085 00)

Lockwashers (2) (item 158, WP 0087 00)

Nut, self-locking (item 86, WP 0087 00)

Nut, self-locking (item 108, WP 0087 00)

Materials/Parts (cont.)

Screw (item 4, WP 0087 00)

Screws (2) (item 143, WP 0087 00)

Shoulder bolt (item 3, WP 0087 00)

Washer (item 125, WP 0087 00)

References

TM 9-2350-256-20

WP 0051 00

Removal

NOTE

Steps 1 thru 3 are for removing the arm without removing the entire main winch level winder assembly.

Refer to WP 0051 00 for removal of the entire main winch level winder assembly.

1.

Remove two screws (1) and screws (2).

2.

Remove main winch cable (3) in accordance with TM 9-2350-256-20.

3.

Remove self-locking nut (hidden) (4), washer (hidden) (5), shoulder bolt (6), and arm (7). Discard self-locking nut.

Disassembly

1.

The following illustration, with its accompanying legend, serves to identify all subassemblies and attaching parts. The

step-by-step disassembly procedure is provided after this illustration:

0060 00-1