TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 314 of 584

TM 9-2350-256-34

0060 00

Cleaning

WARNING

Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid

injury or death, keep away from open fire and use in a well-ventilated area. If solvent gets on skin or

clothing, wash immediately with soap and water.

1.

Wash all parts, except seals and gaskets, in cleaning compound or paint thinner. Blow parts dry with moisture-free com-

pressed air; then immerse parts in clean oil to prevent rusting.

Inspection-Acceptance and Rejection Criteria

1.

Inspect all threaded parts for burrs and damage to threads. Repair damaged threads with a thread chaser.

2.

Inspect all hex nuts, hex head screws, and socket head screws for rounded corners. Check screws for bending.

3.

Inspect rollers for freedom of movement.

Assembly

1.

Install lever (22), screw (21), and self-locking nut (20).

2.

Install two bearings (19) to rollers (18).