TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 437 of 584

TM 9-2350-256-34

0079 00

INTERMEDIATE MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

SPADE SUBPLATE AND CONTROL VALVE ASSEMBLY MAINTENANCE

REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, ASSEMBLY, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 34, WP 0086 00)

Materials/Parts

Cleaning compound (item 5, WP 0085 00)

Oil (item 8, WP 0085 00)

Paint thinner (item 18, WP 0085 00)

Lockwashers (4) (item 161, WP 0087 00)

Lockwashers (4) (item 162, WP 0087 00)

Packings (2) (item 127, WP 0087 00)

Materials/Parts (cont.)

Packings (6) (item 133, WP 0087 00)

Pin (item 193, WP 0087 00)

Pins, cotter (2) (item 115, WP 0087 00)

Screws (4) (item 66, WP 0087 00)

Screws (4) (item 101, WP 0087 00)

Screws (4) (item 184, WP 0087 00)

Equipment Condition

Subfloor plate removed (TM 9-2350-256-20)

Removal

NOTE

The spade combination control valve can be removed without removing the entire spade subplate and

control valve assembly from the vehicle. This procedure covers removing the subplate and control valve

assembly or the spade combination control valve only.

NOTE

If removing entire spade subplate and control valve assembly (14), perform steps 1 thru 5 only. If

removing only combination control valve (16), perform steps 3, 6, and 7 only.

0079 00-1