TM 9-2350-256-34
0080 00
Installation
1.
Connect spade control cable (18) and install pin (21) and two cotter pins (20). Do not tighten two jamnuts (19).
2.
Install spade control cable (18) and clevis (17) and tighten two jamnuts (16).
3.
Install pin (15) and two cotter pins (14).
4.
Install six spacers (beneath cover) (13), cover (12), six lockwashers (11), small screws (10), and two large screws (9).
5.
Install spade control lever (8), pin (7), and two cotter pins (6).
6.
Install bracket (4) with adjustment screws (5) and four screws (3).
7.
Install pin (2) and two cotter pins (1).
8.
Center spade control lever (8) and tighten two jamnuts (19).