TM-9-2350-256-34

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 2005

TM-9-2350-256-34 - Page 452 of 584

TM 9-2350-256-34

0082 00

Installation

NOTE

This procedure covers the right-hand valve. The left-hand valve is installed in the same manner except

there are only two hydraulic lines to be connected in step 8 for the left-hand valve.

1.

Install three packings (hidden) (16).

2.

Install valve (8) and three socket head screws (15) to subplate (7).

3.

Install arm (13) and spring pin (14) to valve (8).

4.

Install cam follower (12) and nut (11) to arm (13).

5.

Install support (3), three lockwashers (10), and screws (9) to subplate (7).

6.

Install support (3), subplate (hidden) (7), and valve (hidden) (8) together as an assembly, two washers (6), lockwashers (5),

and screws (4).

7.

Tighten two jamnuts (2) on support (3).

8.

Connect four hydraulic lines (1).