TM-9-2350-256-34
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 2005
TM-9-2350-256-34 - Page 447 of 584
TM 9-2350-256-34
0081 00
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
FLOW REGULATING SUBPLATE ASSEMBLY MAINTENANCE
DESCRIPTION, REMOVAL, DISASSEMBLY, CLEANING, INSPECTION, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 34, WP 0086 00)
Materials/Parts
Cleaning compound (item 5, WP 0085 00)
Materials/Parts (cont.)
Oil (item 8, WP 0085 00)
Paint thinner (item 18, WP 0085 00)
Lockwashers (3) (item 161, WP 0087 00)
Screws (3) (item 214, WP 0087 00)
DESCRIPTION
The flow regulating subplate assembly is mounted to the wall behind the right front boom cylinder in the crew compartment.
The four flow regulators in this assembly are installed in the main hydraulic system, regulate oil flow in one direction regardless
of pressure, and permit unrestricted flow in the opposite direction. The regulators control the speed of raising and lowering the
boom and spade.
Removal
1.
Disconnect seven hydraulic lines (1).
2.
Disconnect three hydraulic lines (2).
3.
Remove three screws (3), lockwashers (4), and flow regulating subplate assembly (5) from subplate assembly mounting
bracket (6). Discard lockwashers.
Disassembly
1.
The following illustration, with its accompanying legend, serves to identify all subassemblies and attaching parts. The
step-by-step disassembly procedure is provided after this illustration:
0081 00-1
Back to Top
