TM-9-2350-261-10
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
OPERATOR'S MANUAL
TM-9-2350-261-10 - Page 197 of 761
TM 9-2350-261-10
CONNECT CVC HELMET TO INTERCOM CONTROL BOX
0024 00
THIS WORK PACKAGE COVERS:
Connect CVC Helmet to Intercom Control Box (page 0024 00-1).
INITIAL SETUP:
Maintenance Level
Operator
Personnel Required
Driver
Commander
References
TM 11-5820-498-12
CONNECT CVC HELMET TO INTERCOM CONTROL BOX
NOTE
Procedure is the same at both driver’s and commander’s station.
1.
Connect helmet cord to quick disconnect plug. See TM 11-5820-498-12.
2.
Connect long cord to INT jack on intercom control box.
3.
Connect short cord to RAD jack on intercom control box.
END OF TASK
0024 00-1/2 blank
Back to Top
