TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 202 of 761

TM 9-2350-261-10

REMOVE/INSTALL 4.2 KW GENERATOR SET (M577A2 AND M1068 ONLY) — Continued

0025 00

2.

Position davit in mounting brackets. Attach chain hoist hooks to davit and lifting bar on generator set.

WARNING

Hanging loads could kill or injure you. Keep away from hanging loads and overhead equipment.

3.

Hoist generator set enough to clear enclosure. Swing generator set over enclosure and lower slowly into enclosure.

4.

Tighten thumbscrews and clamps securing generator set to enclosure. Turn clamps 90 degrees.

0025 00-4