TM-9-2350-261-10

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

OPERATOR'S MANUAL

TM-9-2350-261-10 - Page 222 of 761

TM 9-2350-261-10

START ENGINE WITH OUTSIDE POWER SOURCE — Continued

0027 00

NOTE

Do Step 3 if your carrier is equipped with an M8 alarm system. If you do Step 3, connect leads

and install distribution box cover after starting problem has been corrected.

3.

Remove distribution box cover and disconnect M182 mount cable leads 509B and 509C before jump-starting.

WARNING

Electrical slave cable can be improperly connected causing electrical spark or fire. Personnel

can be killed or injured. Equipment can be damaged. Match connector guide lug and cable

prongs with receptacle hole.

4.

Connect slave cable to auxiliary power receptacle on disabled carrier.

5.

Connect slave cable to auxiliary power receptacle on source carrier.

6.

Start engine of source carrier (WP 0026 00).

7 .

Turn MASTER SWITCH

to

ON in disabled

vehicle.

0027 00-2