TM-9-2350-261-20-1

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 1 OF 4

TM-9-2350-261-20-1 - Page 104 of 346

TM 9-2350-261-20-1

INTRODUCTION HOW TO USE TROUBLESHOOTING — Continued

0005 00

STE-ICE Test Procedure

A STE/ICE test procedure will tell you how to use the STE/ICE test equipment. You may be directed to go to a STE/ICE test

procedure when performing the troubleshooting procedures. The parts of a STE/ICE test procedure are given below.

Legend to Sample Above

1. TITLE

Test number and procedure name.

2. INITIAL SETUP

This tells you the tools, materials/parts, personnel, references, and equipment

conditions needed to do the procedure.

3. STE/ICE HOOK UP

Steps that tell you how to perform the HOOK UP/REMOVE STE/ICE test.

4. TASK STEPS

Steps that tell you how to set up and perform the test.

Before you begin, make sure you have all items in the INITIAL SETUP. Do all steps in the test procedure and then return to

where you left off in troubleshooting task. Continue to follow troubleshooting task instructions to find and correct the fault.

Locating the Correct Troubleshooting Procedure

(1) Carrier arrives at shop.

(2) Read DA Form 2404.

(3) Verify that the problem on DA Form 2404 exists.

(4) Look up the carrier symptom in the Malfunction/Symptom Index (WP 0006 00) and go to that task.

000500-3