TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 19 of 1008
TM 9-2350-261-20-2
FILL COOLING SYSTEM
0194 00
THIS WORK PACKAGE COVERS:
Servicing (page 0194 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
Antifreeze and Battery Tester (WP 0780 00, Item 77)
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Antifreeze (WP 0782 00, Item 7)
Container (14 gallon)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Driver’s power plant access panel removed
(WP 0430 00)
Power plant rear access panel removed (WP 0431 00,
WP 0432 00, or WP 0433 00)
SERVICING
NOTE
When filling the radiator, add coolant slowly to allow trapped air to escape.
NOTE
Use antifreeze coolant in system at all times. It will reduce corrosion in engine block and cooling
system parts. Ethylene glycol coolant will provide low temperature protection. Mix coolant and
clean water based on protection label on container.
1.
Make sure all six drain cocks (1), (2), (3), and (4) are closed and all tubes, hoses and connections are tight.
019400-1
Back to Top
