TM 9-2350-261-20-2
REPLACE SERVICE AND INFRARED HEADLIGHTS — Continued
0256 00
INSTALLATION
1.
Place headlight (1) and large bevel washer (2) on hull bracket. Secure with small bevel washer (3), new lockwasher (4),
and nut (5).
2.
Connect circuit 18 lead (6) and circuit 17 lead (7) to rear of service headlight (1).
3.
Connect circuit 515 lead (6) and circuit 514 lead (7) to rear of infrared headlight (1).
FOLLOW-THROUGH STEPS
1.
Turn MASTER SWITCH to ON (see your -10).
WARNING
Looking directly at infrared headlights may burn your eyes. Do not look directly into infrared
headlight.
2.
Turn on service headlights to check that they work properly (see your -10).
3.
Turn infrared headlights on (see your -10) and hold hand near lens. Heat means headlight is working.
4.
Turn all switches OFF on instrument panel (see your -10).
5.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
0256 00-2