TM 9-2350-261-20-2
REPAIR SERVICE AND INFRARED HEADLIGHTS
0257 00
THIS WORK PACKAGE COVERS:
Disassembly (page 0257 00-1).
Clean, Inspect, and Repair (page 0257 00-2).
Assembly (page 0257 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Gasket
Lockwasher
Preformed packing
Preformed packing
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Service and/or infrared headlight removed (WP 0256 00)
DISASSEMBLY
NOTE
Repair of service headlight and infrared headlight is the same. Service headlight has clear lens
and infrared headlight has dark red lens.
1.
Loosen four screws (1). Remove door (2) and preformed packing (3) from headlight body (4). Discard packing.
2.
Loosen four screws (5). Remove retainer plate (6), lens (7), and gasket (8) from door (2). Discard gasket.
3.
Loosen three screws (9). Remove retainer plate (10) from body (4). Pull lamp unit (11) from body. Disconnect lamp unit
from plug.
4.
Remove four screws (12), resilient mount (13), and preformed packing (14) from body (4). Discard preformed packing.
5.
Remove screw (15) and lockwasher (16) from mount (13). Discard lockwasher.
025700-1