TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 659 of 1008

TM 9-2350-261-20-2

REPLACE DIFFERENTIAL OIL PUMP — Continued

0354 00

9.

TIGHTEN TWO SCREWS (10) TO 35–40 LB-FT (47-54 N·M). Use torque wrench.

10. Secure pump (3) to secondary drive gear with washer (16), nut (17), and new cotter pin (18).

NOTE

Two washers (16) are the maximum used. If two washers were removed, two will be installed.

11. Install washer(s) (16), to secure pump to drive gear.

12. Connect oil inlet hose (19) to quick disconnect coupling (9).

13. Connect oil outlet hose (20) to elbow (2).

035400-5