TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 658 of 1008

TM 9-2350-261-20-2

REPLACE DIFFERENTIAL OIL PUMP — Continued

0354 00

INSTALLATION

NOTE

If a new oil pump is being installed, use fittings from old pump.

1.

Install new packing (1) and elbow (2) in pump (3).

2.

Install new packing (4), retainer (5), nut (6), and elbow (7) in pump (3). Tighten nut (6).

3.

Install new packing (8) and quick disconnect coupling half (9) in elbow.

4.

Apply a thin, even coat of antiseize compound to cleaned external threads of two screws (10) before installation.

5.

Fill pump (3) with oil.

6.

Install retainer (11) and key (12) on pump (3).

7.

Install new gasket (13) on pump (3).

8.

Align key (12) in keyway of secondary drive gear. Secure pump (3) to transfer gearcase (14) with two new key washers

(15) and screws (10).

0354 00-4