TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 271 of 932

TM 9-2350-261-20-3

REPAIR COMMANDER’S SEAT (M113A2, M1059, AND M1064)

0487 00

THIS WORK PACKAGE COVERS:

Disassembly (page 0487 00-1).

Clean, Inspect, and Repair (page 0487 00-4).

Assembly (page 0487 00-5).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Cotter pin (4)

Locknut (6)

Splined nut, as needed (8)

Splined washer, as needed (8)

Spring pin (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Commander’s seat removed from post (WP 0484 00 or

WP 0485 00)

DISASSEMBLY

1.

Remove seat cushion (1).

2.

Remove eight screws (2) and washers (3). Remove seat (4) from seat support (5).

NOTE

Remove splined nut(s) only if damaged.

3.

If splined nuts (6) need to be replaced, drive old nuts out of seat (4). Discard nuts.

048700-1