TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 307 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR COMMANDER’S PLATFORM AND POST (M577A2

AND M1068 ONLY) — Continued

0492 00

INSTALLATION

1.

Hold platform lock in unlocked position and install platform (1) on post (2).

2.

Align base (3) with post (2). Secure with two screws (4), washers (5), and new locknuts (6).

3.

Install hook (7) on quick-release pin (8) and chain (9). Squeeze both ends ofhooktosecure

.

4.

Install tube (10) on chain (9).

5.

Install hook (11) on chain (9) and hull top lug plate. Squeeze both ends of hook to secure.

6.

Align link (12) with hull top plate brackets. Secure with screw (13), washer (14), and new locknut (15).

7.

Place post (2) and platform (1) in carrier. Align post with link (12). Secure with quick-release pin (8).

8.

Align base (3) with hull crossmember. Secure with two washers (16) and screws (17).

FOLLOW-THROUGH STEPS

1.

Start engine (see your -10).

2.

Raise and lock ramp (see your -10).

3.

Stop engine (see your -10).

END OF TASK

0492 00-5/6 blank