TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 408 of 932

TM 9-2350-261-20-3

REPLACE CUSHIONING PADS — Continued

0523 00

INSTALLATION

1.

Thoroughly clean hull mating surface with cleaning compound.

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Apply thin coat of adhesive to hull mating surface and back of new pad (1).

3.

Allow 10 to 20 minutes for adhesive to dry. Surface should be tacky, but not too sticky. Warmer temperature will

speed drying time.

4.

Position pad (1) on hull and press firmly into place.

END OF TASK

0523 00-2