TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 409 of 932

TM 9-2350-261-20-3

REPLACE OIL CAN BRACKET

0524 00

THIS WORK PACKAGE COVERS:

Removal (page 0524 00-1).

Clean, Inspect, and Repair (page 0524 00-1).

Installation (page 0524 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Personnel Required

Unit Mechanic

Helper (H)

Materials/Parts

Locknut (2)

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Trim vane lowered (see your -10)

Power plant access door open (see your -10)

REMOVAL

1.

Remove oil can, if present.

2.

Have helper hold two locknuts (1) in driver’s compartment.

3.

Remove two locknuts (1), screws (2), and oil can bracket (3) from power plant compartment. Discard locknuts.

CLEAN, INSPECT, AND REPAIR

1.

Check oil can bracket. Replace bracket that is cracked, damaged, or has a loose clamp.

052400-1