TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 198 of 767

TM 9-2350-261-20-4

REPLACE M8A3 NBC CABLES, SWITCH ASSEMBLY, AND BRACKETS

(M577A2 ONLY) — Continued

0676 00

7.

Pull cable (1) with grommet (2) from mount plate (3). If damaged, discard grommet.

8.

Remove three screws (4), lockwashers (5), and clamps (6) from driver’s rear bulkhead. Remove clamps from cable

(1). Discard lockwashers.

9.

Cut five tie straps (7) securing cable (1) to adjacent wiring harness. Discard tie straps.

10. Remove cable (1) from connector (8).

11. Disconnect circuit 10 lead (9) and lead (10) from connector (8).

067600-3