TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 199 of 767

TM 9-2350-261-20-4

REPLACE M8A3 NBC CABLES, SWITCH ASSEMBLY, AND BRACKETS

(M577A2 ONLY) — Continued

0676 00

INSTALLATION

1.

Install lead (10) and circuit lead 10 (9) to connector (8).

2.

Install cable (1) in connector (8).

3.

Route cable (1) along adjacent wiring harness. Secure with five new tie straps (7).

4.

Install three clamps (6) on cable (1). Secure clamps to driver’s rear bulkhead with three screws (4) and new lockwashers

(5).

5.

If damaged, install new grommet (2) on cable (1). Route cable through panel (3) and insert grommet.

0676 00-4