TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 238 of 767

TM 9-2350-261-20-4

REPLACE M13 NBC HEATER WIRING HARNESS (M1068 ONLY) — Continued

0684 00

INSTALLATION

1.

Install circuit lead 537E (8) on rear operator’s heater (13).

2.

Install two clamps (12) on circuit lead 537E (8) and rear operator’s heater inlet hose (9). Secure clamps to right sponson

with two screws (10) and new lockwashers (11).

3.

Secure circuit lead 537E (8) to rear operator’s heater inlet hose (9) with new tie straps (7).

4.

Install circuit lead 537D (2) on front operator’s heater (6).

5.

Install clamp (5) on circuit lead 537D (2) and adjacent hoses. Secure with screw (3), new lockwasher (4), and clamp (5)

on right sponson.

6.

Secure circuit lead 537D (2) to adjacent hoses with new tie straps (1).

068400-5