TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 269 of 767

TM 9-2350-261-20-4

REPLACE M8A3/M14 NBC CABLES AND SWITCH ASSEMBLY (M113A2

ONLY) — Continued

0690 00

REMOVAL

1.

Loosen screw (1) on mount (2) and remove ground lead (3).

2.

Remove power cable and ground assembly (4) from air purifier (5).

3.

Remove two screws (6), washers (7), locknuts (8), and circuit breaker switch assembly (9) from instrument panel.

Discard locknuts.

4.

Remove power cable (4) from jack (10) on switch (11).

5.

Remove short cable assembly (12) from jack (13) on circuit breaker (14) and jack (15) on switch (11).

6.

Remove circuit 579A cable assembly (16) from jack (17) on circuit breaker (14).

7.

Remove two screws (18), lockwashers (19), and clamps (20) from bulkhead. Remove clamps from circuit 579A cable

assembly (16). Discard lockwashers.

8.

Remove three tie straps (21) securing circuit 579A cable assembly (16) to wiring harness on side plate. Discard tie straps.

0690 00-2