TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 280 of 767

TM 9-2350-261-20-4

REPLACE M42 VENTILATED FACE MASK (VFM) GAS FILTER — Continued

0693 00

INSTALLATION

NOTE

When positioning gas filter against bracket, ensure the air flow direction, as marked on gas

filter, is toward the VFM heaters.

1.

Install bracket (1), two screws (2), new lockwashers (3), and washers (4) in mounting position.

2.

Place gas filter (5) into position against bracket (1), slide clamps (6) and (7) over bracket and gas filter. Tighten clamps

securely.

3.

Install coupling (8) and clamp (9) on gas filter (5). Tighten clamp securely.

4.

Install coupling (10) and clamp (11) on gas filter (5). Tighten clamp securely.

FOLLOW THROUGH STEPS

1.

Raise and lock ramp (see your -10).

2.

Stop engine (see your -10).

END OF TASK

0693 00-3/4 blank