TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 498 of 767

TM 9-2350-261-20-4

REPLACE CABLE W124 (M1068 ONLY)

0757 00

THIS WORK PACKAGE COVERS:

Removal (page 0757 00-1).

Installation (page 0757 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

Electronic Equipment Tool Kit (WP 0780 00, Item 81)

Materials/Parts

Locknut (2)

Tie strap (6)

Personnel Required

Signal Support System Specialist 31U10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Battery ground lead disconnected (WP 0294 00)

REMOVAL

1.

Disconnect cable W124 plug P1 (1) from Data Panel Assembly A12 jack J3 (2).

2.

Remove two screws (3), locknuts (4), clamps (5), and four washers (6) from APIU rack (7). Discard locknuts.

3.

Remove screw (8), clamp (9), and clamp (10) from weldnut (11).

4.

Remove four screws (12) and clamps (13) from cables (14) and weldnuts (15).

5.

Remove three tie straps (16) from cables (14). Discard tie straps.

6.

Remove three tie straps (17) from cables (14). Discard tie straps.

075700-1