TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 504 of 767

TM 9-2350-261-20-4

REPAIR CABLE ASSEMBLY (W4/W6) (M1068 ONLY)

0759 00

THIS WORK PACKAGE COVERS:

Disassembly (page 0759 00-1).

Assembly (page 0759 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Soldering Torch Kit (WP 0780 00, Item 70)

Personnel Required

Unit Mechanic

References

WP 0312 00

Equipment Condition

Cable Assembly W4 removed (WP 0740 00)

Cable Assembly W6 removed (WP 0742 00)

DISASSEMBLY

NOTE

The W4 cable assembly has four terminals. The W6 cable assembly has three terminals and a

bare wire end.

1.

Remove six screws (1), washers (2), and cover (3) from connector (4).

2.

Loosen two adapters (5) securing cables (6) in connector (4).

3.

Remove two screws (7), washers (8), and two cables (6) from connector (4).

4.

Remove four terminals (9) from cable assembly W4 or three terminals (9) from cable assembly W6.

075900-1