TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 209 of 785

TM 9-2350-261-34

REPLACE ENGINE — Continued

0021 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

65. Apply a thin coat of sealant to both sides of gasket (10) before assembly.

66. Install deaeration elbow (3) with hose (7), clamp (8), elbow (9), and new gasket (10) on thermostat housing cover (6).

Secure with two screws (4) and new key washers (5).

67. Connect coolant tube (2) to deaeration elbow (3). Secure with clamp (1).

FOLLOW-THROUGH STEPS

1.

Install transfer gearcase on engine (WP 0019 00).

2.

Install transmission on transfer gearcase (WP 0016 00).

3.

Install power plant in carrier (see your -20).

4.

Change engine oil and filter (see your -20).

5.

Change fuel filters (see your -20).

6.

Check belt tension (see your -20).

7.

Adjust engine power disconnect (see your -20).

8.

Adjust governor linkage (see your -20).

END OF TASK

0021 00-36