TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 211 of 785

TM 9-2350-261-34

REPAIR 100 AMP GENERATOR FUEL FILTER MOUNTING BRACKET — Continued

0022 00

1.

Clean fuel filter bracket (1) using solvent, cleaning compound and wiping rag.

2.

Fabricate reinforcement plate (2) for welding.

3.

Clamp reinforcement plate (2) to bracket (1) in position as shown.

WARNING

Fumes from welding cadmium plated fuel filter bracket are toxic and can poison you. Wear a

respirator and use in a well ventilated area to protect you against fume poisoning.

4.

Weld plate (2) to bracket (1) in accordance with TC 9-237. Welding of crack(s) are not necessary.

5.

Apply paint to repaired area. See TM 43-0139/TB 43-0242.

FOLLOW-THROUGH STEPS

1.

Install fuel filter bracket (see your -20).

END OF TASK

0022 00-2