TM-9-2350-261-34
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-261-34 - Page 347 of 785
TM 9-2350-261-34
REPAIR COMMANDER’S HATCH COVER HULL HINGES (M577A2 AND
M1068 ONLY) — Continued
0048 00
1.
Remove and discard broken hinge part (1), (2), or (3) from hull.
2.
Use a machinist’s hammer and a cold chisel to chip off remaining part of bad hinge (1), (2), or (3) from hull.
3.
Use a disc sander to sand chipped area smooth and remove any hard coating from weld area.
ASSEMBLY
1.
Clamp or tack weld new hinge part (1), (2), or (3) on hull.
2.
Install cover on hatch (see your -20).
0048 00-2
Back to Top
