TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 556 of 785

TM 9-2350-261-34

REPAIR TENT (M577A2 AND M1068 ONLY) — Continued

0071 00

NOTE

A hole or tear in the tent more than 4-3/4 inches (12 cm) in diameter or length may be repaired

by a cement patch. The tear must not occur on seams, edges, or areas that support hardware.

The materials used to make a cement patch are adhesive, round patches, roller, board, wire

brush, and soft bristled brush. For cement patch repair, do Steps 2 - 9.

2.

Select one of three sizes of patches that will overlap damaged area with a margin of at least 3/4 inch (19 cm) on all sides.

3.

Place board under damaged area for a flat working surface.

4.

Buff patch and damaged area of tent with a wire brush.

007100-3